Fandom

BattleBots Wiki

Nsyncerator

1,512pages on
this wiki
Add New Page
Talk0 Share
Nsyncerator

Nsyncerator's Season 4.0 appearance.

Nsyncerator was a lightweight robot built by Eric Stoliker which competed in Seasons 2.0 and 4.0 of BattleBots. It was originally a circular robot armed with a spinning overhead blade, but it was revised for Season 4.0 to be a wedged robot armed with overhead spinning flails. Nsyncerator lost both of its matches and was retired after Season 4.0.

Eric Stoliker also built and competed with the heavyweight Bender, which competed more frequently.

Robot historyEdit

Season 2.0Edit

Nsyncerator1

Nsyncerator's Season 2.0 appearance.

Nsyncerator was supposed to fight Evil Fish Tank in it's first fight, but due to technical issues Nsyncerator was forced to forfeit.

Season 4.0Edit

In Nsyncerator only fight in Season 4.0, it fought Rambite. The first hit between the two robots caused white sparks to fly across the arena. The two robots continued to hit each other, with every hit making sparks fly. Nsyncerator was sent flying 3-4 feet back into the spikes after an attack from Rambite. NSyncerator then stopped moving with smoke pouring out and was eliminated. It turned out that the damage caused to Nsyncerator by Rambite was pretty bad; the 3/8 inch hardened bolts were sheared off and spinning disc had lost the titanium blades, the titanium armored front had been torn through, one of its motor controllers had been cut in half, the back frame on both corners had been torn through, one motor and the motor mounts had been cut through. As a result, Nsyncerator's motor came loose and the belt fell off, immobilizing Nsyncerator.

Wins/LossesEdit

  • Wins: 0
  • Losses: 2
Wins Losses
Season 2.0 None Evil Fish Tank (Forfeit)
Season 4.0 None Rambite

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.